If you are trying to budget for new countertops, you have probably noticed that prices vary wildly depending on who you ask. That is because the final number depends on a lot of factors: the material you choose, the size of your space, your edge profile, whether your old countertops need to be removed, and who is doing the work.
This guide breaks down realistic 2026 pricing for the Phoenix area so you can plan without surprises.
What Countertops Cost in Arizona: A Quick Overview
Here is a general range for the most common countertop materials, installed:
| Material | Installed Price Range (per sq ft) |
|---|---|
| Granite | $45 – $100 |
| Quartz | $55 – $120 |
| Quartzite | $70 – $145 |
| Marble | $75 – $150 |
These are full-service numbers covering material, fabrication, and installation. They do not include demolition and removal of your existing countertops, which typically adds $3 to $8 per square foot.
Most kitchen countertop projects in the Phoenix area run between 40 and 60 square feet. A standard bathroom vanity top is usually 15 to 25 square feet.
Granite Countertops: $45 to $100 per sq ft Installed
Granite is the most popular choice in the Valley, and for good reason. It holds up well in Arizona’s heat, it is durable enough for daily kitchen use, and the price range is wide enough to fit most budgets.
What moves the price:
Entry-level granite, typically solid colors with minimal veining, starts around $45 per square foot installed. Mid-grade slabs with more movement and variation run $60 to $75. Premium exotic granites, which are rarer and often imported, can push past $100.
Remnants can cut costs significantly. If you have a smaller project like a bathroom vanity, laundry room counter, or bar top, using a remnant slab from a larger job can bring your cost down by 20 to 40 percent. Ask your fabricator what they have in stock. We often have remnant pieces in stock at our Peoria fabrication yard.
Quartz Countertops: $55 to $120 per sq ft Installed
Quartz is engineered stone made from natural quartz crystals bound with resin, so it is non-porous, stain resistant, and requires no sealing. That low-maintenance profile makes it a top pick for busy kitchens and bathrooms.
What moves the price:
Entry-level quartz from domestic manufacturers starts around $55 per square foot installed. Mid-range options from brands like Silestone, Cambria, and MSI typically run $70 to $95. High-end quartz with thick slabs, unique patterns, or premium finishes can exceed $120.
One note for Arizona homeowners: quartz can be more susceptible to damage from prolonged direct sunlight than natural stone. If your counters are near a large south or west-facing window, it is worth discussing this with your fabricator before deciding.
Quartzite Countertops: $70 to $145 per sq ft Installed
Quartzite is a natural stone, not to be confused with quartz. It starts as sandstone and is transformed by heat and pressure over millions of years into an extremely hard material. The result is a stone that looks similar to marble but performs closer to granite.
What moves the price:
Quartzite is rarer than granite and requires more careful fabrication, which is why it costs more. Common varieties like White Macaubas start around $70 to $85 per square foot. Exotic quartzites like Taj Mahal, Sea Pearl, and Calacatta Gold can run $110 to $145 or more depending on availability.
Quartzite is one of the best choices for Arizona outdoor kitchens. It handles UV exposure and heat better than most other natural stones, and far better than quartz.
Marble Countertops: $75 to $150 per sq ft Installed
Marble brings a look that no other stone can match. But it comes with trade-offs that are especially worth understanding in Arizona.
What moves the price:
Carrara marble, one of the more accessible options, typically runs $75 to $100 per square foot installed in the Phoenix area. Italian and Brazilian varieties with stronger veining and rarer patterns push into the $120 to $150 range.
What to know before you choose marble: It is a softer, more porous stone than granite or quartzite. That means it can etch from acidic foods and liquids like lemon juice or wine, and it requires sealing at least once a year. In kitchens with heavy daily use, marble shows wear over time. In bathrooms, wet bars, and lower-traffic spaces, it performs beautifully with less upkeep.
Many homeowners choose marble for bathrooms and keep granite or quartz in the kitchen. That is a reasonable approach.
What Else Affects Your Total Cost
The material is only part of the price. Here are the other factors that add up:
Square footage. Measure your countertops carefully. Include your island if you have one. Most fabricators charge a minimum, so very small projects may not see proportional savings.
Edge profiles. A basic eased edge is typically included in the base price. Beveled, bullnose, ogee, and waterfall edges add $10 to $25 per linear foot depending on complexity.
Cutouts. Each sink cutout adds $75 to $150. Cooktop cutouts are similar. If you have an undermount sink, the fabricator needs to precisely cut and polish that opening.
Thickness. Standard slabs are 3/4 inch (2cm) or 1.25 inch (3cm). Thicker slabs cost more and look more substantial. A 3cm kitchen island tends to look more proportional than 2cm.
Old countertop removal. If your fabricator handles demo and haul-away, budget $3 to $8 per square foot. Some homeowners remove countertops themselves to save money, but confirm your fabricator is okay with that before you start swinging a pry bar.
Plumbing disconnection/reconnection. Your plumber needs to disconnect and reconnect your sink. This usually runs $75 to $150 depending on complexity.
How to Get the Best Value
Get at least two quotes. Pricing varies more than most people expect. A big-box store quote and a local fabricator quote for the same material can differ by 20 to 30 percent, and the quality of the work often differs too.
Ask to see the actual slab. Granite and quartzite are natural materials, so two slabs from the same lot can look completely different. Visit a local stone distributor or slab yard and approve the specific slab that will be cut for your project.
Ask about remnants. For smaller projects, remnant slabs are priced to move. You can often get a premium material at a budget price if the remnant is big enough for your space.
Time your project. Late fall and early winter tend to be slower seasons for countertop fabricators in the Phoenix area. Scheduling during slower periods can sometimes give you more flexibility on pricing or lead times.
Get an Accurate Quote for Your Project
Every project is different. The best way to know what your countertops will cost is to have someone measure your space, help you understand your material options, and give you a firm quote in writing.
Mirage Marble and Granite has been fabricating and installing countertops in the Phoenix area for years. We work with granite, quartz, quartzite, marble, and more. We also have remnants available at our fabrication yard for smaller projects, while full slab selection is typically handled through local stone distributors across the Valley.
Contact us to schedule a consultation and start planning your countertop project.